| 1 |
Dr. Sasank Shekhar Panda |
2352-4855 |
Marine oil spill clean-up: A review on technologies with recent trends
and challenges |
Regional Studies in Marine Science |
SCIE |
2.1 |
29-Oct-24 |
https://doi.org/10.1016/j.rsma.2024.103876 |
| 2 |
Dr. Kali Charana Rath |
ISSN : 2395-1737 (Print) |
Empowering Rural India: Localizing SDGs for
Community Development |
International Journal of Academic Research and Development (IJAR&D) |
|
|
24-Sep-24 |
|
| 3 |
Mr. Nalinikanta Panda |
2250-0545 |
Analysis of COP Using Blended R134a and R600a in Refrigeration System as a Replacement to R134a. |
Journal of The Institution of Engineers (India): Series C |
SCOPUS |
|
23-May-24 |
10.1007/s40032-024-01061-z |
| 4 |
Mr. Nalinikanta Panda |
1001-2400 |
Optimization of Wall Thickness for Decrease Heat Losses in Modern Induction Furnace for Steel Making |
Journal of Xidian University |
UGC CARE |
|
09-May-24 |
10.5281/Zenodo.11120590 |
| 5 |
Mr. S.P Khadanga |
0975-0991 |
Gas hold-up, pressure drop and flow regime study in semi-batch PSRBC bubble column |
Indian Journal of Chemical Technology |
SCIE |
|
08-Mar-24 |
DOI: 10.56042/ijct.v31i2.9219 |
| 6 |
Mr. S.P Khadanga |
0735-1933 |
Pressure-drop and mass transfer study in multi-stage PSRBC sparger bubble column-An experimental investigation |
International Communications in Heat and Mass Transfer |
SCIE |
7 |
07-Mar-24 |
https://doi.org/10.1016/j.icheatmasstransfer.2024.107347 |
| 7 |
Dr. Kali Charana Rath |
1873-6998 |
A two phase analysis of orifice based on a non-dimensional number |
Flow Measurement and Instrumentation |
ESCI |
2.2 |
23-Dec-23 |
https://doi.org/10.1016/j.flowmeasinst.2023.102470 |
| 8 |
Mr. S.P Khadanga |
0975-007X |
Hydrodynamic study of pressure swing rotating bubble cap column with gas-liquid systems |
Indian Chemical Engineer |
SCIE |
1.5 |
24-May-23 |
DOI: 10.1080/00194506.2023.2205860 |
| 9 |
Dr. Kali Charana Rath |
ISSN: 1873-6998 |
Determining the flow correlation for an orifice with a non-dimensional number |
Flow Measurement and Instrumentation |
SCIE |
2.2 |
20-Apr-23 |
https://doi.org/10.1016/j.flowmeasinst.2023.102338 |
| 10 |
Mr. Manas Ranjan Panda |
0044-0477 |
Analyzing the Machining Effectiveness of EDM on
Inconel 718 Using Copper and Graphite Electrode |
YMER |
SCOPUS |
|
18-Aug-22 |
|
| 11 |
Dr. Sasank Shekhar Panda |
0044-0477 |
Corrosion Analysis of Al-6061 MMCs Reinforced With Fly Ash & Rice
Husk Ash |
YMER |
SCOPUS |
|
30-Jul-22 |
|
| 12 |
Dr. Sasank Shekhar Panda |
2250-0553 |
Influence of Particle Size on Microstructure and Sliding Wear
Response of Fly Ash and Rice Husk Ash Reinforced Al6061
MMCs |
J. Inst. Eng. India Ser. C |
SCOPUS |
|
18-Jun-22 |
|
| 13 |
Mr. Santosh Kumar Tripathy |
2214-7853 |
Parametric optimizination of machining parameter in CNC turning of al based hybrid metal matrix composites |
Materials Today: Proceedings |
SCOPUS |
1.317 |
08-Jun-22 |
https://doi.org/10.1016/j.matpr.2022.05.201 |
| 14 |
Mr. Santosh Kumar Tripathy |
1938-6737 |
Pedestrian Head Impact Analysis on a Vehicle and Measures to Reduce HIC Value |
ECS Transactions |
SCOPUS |
4.386 |
24-Apr-22 |
|
| 15 |
Mr. Nalinikanta Panda |
1671-4512 |
Analysis of Thermal Properties in Double Tube Heat Exchanger with Helical Taped Inserts by Using Water and Nano Fluids |
Journal of Huazhong University of Science and Technology |
SCOPUS |
|
08-Jul-21 |
|
| 16 |
Dr. Kali Charana Rath |
ISSN: 2160-9772 |
Replacement of Human Labour With Integration of Machines Into a Self-Governing System |
International Journal of System Dynamics Applications, IGI Global |
ESCI |
1.8 |
15-Jun-21 |
DOI: 10.4018/IJSDA.2021040105 |
| 17 |
Dr. Sasank Shekhar Panda |
1047-4838 |
Effect of Particle Size on Properties of Industrial and Agro
Waste-Reinforced Aluminum-Matrix Composite |
JOM, The Minerals, Metals & Materials Society |
SCIE |
2.6 |
01-Jun-21 |
|
| 18 |
Mr. Manas Ranjan Panda |
1741-5209 |
Numerical and experimental investigation on the
shapes of the sonotrode during ultrasonic welding |
Int. J. Materials and Product Technology |
SCIE |
1.7 |
14-May-21 |
https://doi.org/10.1504/IJMPT.2021.115222 |
| 19 |
Mr. Santosh Kumar Tripathy |
1309-4653 |
Heat Transfer and Entropy Generation through Finned Tube |
Turkish Journal of Computer and Mathematics Education |
SCOPUS |
|
27-Mar-21 |
|
| 20 |
Mr. Santosh Kumar Tripathy |
2214-7853 |
An extensive analysis of mechanical and tribological studies of Al6061 alloy based hybrid composite reinforced with B4C and Graphene |
Materials Today Proceedings
Materials Today Proceeding |
SCOPUS |
1.317 |
01-Feb-21 |
10.1016/j.matpr.2020.12.1148 |
| 21 |
Dr. Prabina Kumar Patnaik |
2250-2483 |
Effect of Groundnut Shell Particulate Content on Physical and Mechanical Behavior of Jute–Epoxy Hybrid Composite |
Journal of The Institution of Engineers (India): Series E |
SCOPUS |
|
31-Oct-20 |
|
| 22 |
Mr. Santosh Kumar Tripathy |
2214-7853 |
A review on turning analysis of industrial waste reinforced aluminum metal matrix composite |
Materials Today Proceedings |
SCOPUS |
1.317 |
01-Jun-20 |
10.1016/j.matpr.2020.05.731 |
| 23 |
Mr. Santosh Kumar Tripathy |
1757-899X |
Energy Conservation of Speed Breaker with Suitable Design |
IOP Conf. Series: Materials Science and Engineering |
SCOPUS |
|
01-Jun-20 |
10.1088/1757-899X/970/1/012024 |
| 24 |
Dr. Prabina Kumar Patnaik |
https://doi.org/10.1177/0731684420924833 |
Ranking of Al-CSA composite by MCDM approach using AHP–TOPSIS and MOORA methods |
Journal of Reinforced Plastics and Composites |
SCIE |
|
21-May-20 |
|
| 25 |
Mr. Nalinikanta Panda |
1001-2400 |
Study and Analysis for Improving the Performance of an Engine Block by Various Cooling Fluids |
Journal of Xidian University |
UGC CARE |
|
02-May-20 |
|
| 26 |
Mr. Manas Ranjan Panda |
1006-7930 |
Design and Analysis of Electric Go-Kart
Chassis |
JOURNAL OF XI’AN UNIVERSITY OF ARCHITECTURE & TECHNOLOGY |
SCOPUS |
|
24-Mar-20 |
|
| 27 |
Dr. Prabina Kumar Patnaik |
https://doi.org/10.1142/S0218625X19501853 |
TRIBOLOGICAL STUDY ON SLURRY ABRASIVE WEAR BEHAVIOR OF NONWOVEN VISCOSE FABRIC COMPOSITES WITH DOE APPROACH |
Surface Review and Letters |
SCIE |
|
19-Dec-19 |
|
| 28 |
Dr. Sasank Shekhar Panda |
1001-2400 |
Study and Analysis for the improvement of Heat Transfer
Rate of AC Evaporator by Optimizing Materials |
Journal of Xidian University |
SCOPUS |
|
30-Aug-19 |
|
| 29 |
Mr. S.P Khadanga |
1001-2400 |
Study and Analysis for the improvement of Heat Transfer Rate of AC Evaporator by Optimizing Materials |
Journal of Xidian University |
SCOPUS |
|
30-Aug-19 |
https://doi.org/10.37896/jxu14.5/499 |
| 30 |
Dr. Kali Charana Rath |
ISSN: 2249-8958 |
Smart Operations Of Smart Grids Integrated With Fuel Cell With Controlling Strategies |
International Journal of Engineering and Advanced Technology (IJEAT) |
SCOPUS |
|
28-Aug-19 |
10.35940/ijeat.F8635.088619 |
| 31 |
Dr. Kali Charana Rath |
ISSN: 2249-8958 (Online) |
Assessment And Feasibility Analysis Of Off-Grid Solar PV- Pico Hydro Hybrid System |
International Journal of Engineering and Advanced Technology (IJEAT) |
SCOPUS |
|
27-Aug-19 |
DOI: 10.35940/ijeat.F8550.088619 |
| 32 |
Mr. Santosh Kumar Tripathy |
2278-3075 |
Mechanical and Wear Behavioral Assesment of Al 7075-Al2o3 Metal Matrix Composite |
International Journal of Innovative Technology and Exploring Engineering |
SCOPUS |
|
19-Aug-19 |
10.35940/ijitee.K2274.0981119 |
| 33 |
Dr. Sasank Shekhar Panda |
2249-8958 |
Effect of Hot Forging on High Temperature Tribilogical Properties of Aluminium Composite Reinforced with Agro and Industrial Waste |
International Journal of Engineering and Advanced Technology (IJEAT) |
SCOPUS |
|
05-Aug-19 |
10.35940/ijeat.F8204.088619 |
| 34 |
Dr. Prabina Kumar Patnaik |
https://doi.org/10.1002/pc.25090 |
Investigation of mechanical and abrasive wear behavior of blast furnace slag-filled needle-punched nonwoven viscose fabric epoxy hybrid composites |
POLYMER COMPOSITES |
SCI |
|
01-Apr-19 |
|
| 35 |
Mr. G.K Mohanta |
17578981, 1757899X |
The effect of Welding Parameters on Mild Steel by
MMAW |
IOP Conference Series: Materials
Science and Engineering |
SCOPUS |
|
24-Sep-18 |
10.1088/1757-899X/410/1/012015 |
| 36 |
Mr. G.K Mohanta |
2229-5518 |
The Effect Of Hot Forging On Mechanical And Tribological Properties Of Al Alloy Based
MMC |
International Journal of Scientific & Engineering Research |
UGC CARE |
1.1 |
12-Apr-18 |
http://dx.doi.org/10.14299/ijser.2013.01 |
| 37 |
Mr. Nalinikanta Panda |
2348 – 537X |
Experimental and Numerical Analysis of Cylindrical Pin Fin |
International Journal of Multidisciplinary Approach and Studies |
UGC CARE |
|
15-Feb-18 |
|
| 38 |
Mr. Santosh Kumar Tripathy |
2455-2631 |
DESICCANT EVAPORATIVE COOLING SYSTEM |
International Journal of Science & Engineering Development Research |
|
|
01-Apr-17 |
|
| 39 |
Mr. G.K Mohanta |
2249-6890; |
AN EXTENSIVE LITERATURE REVIEW ON WELDING OF AL ALLOY BASED METAL MATRIX COMPOSITE BY FRICTION STIR WELDING |
International Journal of Mechanical and Production
Engineering Research and Development |
SCOPUS |
6.87 |
11-Nov-16 |
|
| 40 |
Mr. Santosh Kumar Tripathy |
2454-1362 |
Optimazation of machining parameter of aluminium oxide and silicon carbide compositmetarial by using taguchi method |
imperial journal of interdisciplinary research |
|
|
01-May-16 |
|
| 41 |
Mr. Nalinikanta Panda |
2455-2631 |
Power generation using speed breakers |
International Journal of Scientific Development and Research (IJSDR) |
UGC CARE |
|
26-Apr-16 |
|
| 42 |
Mr. Santosh Kumar Tripathy |
2321-9653 |
Investigation of Mechanical and Welding Defect of
Metal Piece Welded Through ARC and TIG Welding |
International Journal for Research in Applied Science & Engineering
Technology (IJRASET) |
|
|
01-Apr-16 |
|
| 43 |
Mr. G.K Mohanta |
2319-8354 |
EXPERIMENTAL STUDY ON MECHANICAL
PROPERTIES OF ALUMINIUM ALLOY
REINFORCED WITH SILICON CARBIDE AND FLY
ASH, HYBRID METAL MATRIX COMPOSITES |
International Journal of
Advanced Research in Science and engineering |
SCOPUS |
6.68 |
10-Feb-16 |
|
| 44 |
Mr. Nalinikanta Panda |
2277-9655 |
CONTROL OF CASINGHEAD GAS FLARES FOR HARNESSING ENERGY |
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH
TECHNOLOGY |
UGC CARE |
|
11-Jan-16 |
10.5281/zenodo.49799 |
| 45 |
Mr. Santosh Kumar Tripathy |
2319-8753 |
Model analysis of variation of taper angle for cantilever and simply supported beam |
International Journal of Innovative Research in Science, Engineering and Technology |
UGC CARE |
|
01-Nov-15 |
|
