| SL.NO |
AUTHOR NAME |
TITLE OF THE PAPER |
TITLE OF THE CONFERENCE |
YEAR |
| 1 |
DR. SASANK SHEKHAR PANDA |
EFFECT OF DUAL REINFORCEMENT AND STIR CASTING PROCESS PARAMETERS ON THE FRETTING WEAR RESPONSE OF AL7075–B4C–BFS HYBRID COMPOSITES” |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART E: JOURNAL OF PROCESS MECHANICAL ENGINEERING |
2026 |
| 2 |
DR. KALI CHARANA RATH |
MODELING AND ANALYSIS OF DISSIMILAR LASER WELDING USING FEM: A CASE STUDY ON INCONEL 718 AND SS321 |
INTERNATIONAL CONFERENCE ON CIVIL, ENVIRONMENTAL AND APPLIED SCIENCES (ICCEAS 2025) |
2025 |
| 3 |
MR. SANTOSH KUMAR TRIPATHY |
DESIGN AND ANALYSIS OF UNIVERSAL JOINT CENTER BLOCK |
INTERNATIONAL CONFERENCE ON NEXUS OF KNOWLEDGE USING AI & IOT (ICNKAI-2025) |
2025 |
| 4 |
DR. KALI CHARANA RATH |
LOW HEAT INPUT CMT WELDING: A STUDY ON MICROSTRUCTURE, STRENGTH, AND CORROSION BEHAVIOR IN DISSIMILAR WELDMENTS |
2ND INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY, GREEN COMPUTING AND SUSTAINABLE DEVELOPMENT (ICREGCSD 2025) |
2025 |
| 5 |
DR. KALI CHARANA RATH |
SKILL DEVELOPMENT AND TECHNOLOGICAL ADVANCEMENTS FOR VIKSIT BHARAT @2047 |
NATIONAL SEMINAR ON VIKSIT BHARAT @2047 : ECONOMIC AND MANAGEMENT CHALLENGES |
2024 |
| 6 |
DR. KALI CHARANA RATH |
A MATHEMATICAL MODELING APPROACH FOR CUSTOMISED ROBOT IN SMART MANUFACTURING |
ICCTCCI-2024 |
2024 |
| 7 |
DR. KALI CHARANA RATH |
OPTIMIZING SMART MANUFACTURING SYSTEM THROUGH ADVANCED ROBOTIC KINEMATICS |
FIFTH INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN MATHEMATICAL SCIENCES & COMPUTING (IEMSC-24) |
2024 |
| 8 |
DR. SASANK SHEKHAR PANDA/DR. KALI CHARANA RATH |
SISAL FIBER AND GROUNDNUT SHELL PARTICULATE REINFORCED HYBRID EPOXY COMPOSITES: A STUDY ON MECHANICAL AND TRIBOLOGICAL PROPERTIES |
4TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MECHANICAL ENGINEERING RESEARCH AND DEVELOPMENT. |
2024 |
| 11 |
DR. PRABINA KUMAR PATNAIK DR.SRIMANT KUMAR MISHRA DR.GOPAL KRUSHNA MOHANTA DR.MANAS RANJAN PANDA |
MECHANICAL AND TRIBOLOGICAL PROPERTIES OF AL7075 BASED METAL MATRIX COMPOSITE REINFORCED WITH BORON CARBIDE AND BLAST FURNACE SLAG |
MATERIALS TODAY: PROCEEDINGS |
2023 |
| 12 |
DR.SASANK SHEKHAR PANDA MR.MANAS RANJAN PANDA DR.AJIT KUMAR SENAPATI DR. SRIMANT KUMAR MISHRA DR.PRABIN KUMAR PATNAIK |
OPTIMIZING ABRASIVE WEAR LOSS OF ALUMINUM/FLY ASH AND ALUMINUM/RICE HUSK ASH METAL MATRIX COMPOSITES USING AHP-EDAS AND AHP-COPRAS TECHNIQUES FOR ENHANCED PERFORMANCE |
MATERIALS TODAY: PROCEEDINGS |
2023 |
| 13 |
DR. S.P KHADANGA |
STUDY OF GAS HOLDUP, RPM AND HEAT TRANSFER COEFFICIENT IN AIR AND WATER PRESSURE SWING ROTATING BUBBLE CAP SPARGER COLUMN |
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING: RESEARCHES AND EVOLUTIONARY CHALLENGES |
2023 |
| 14 |
DR. KALI CHARAN RATH |
GEOMETRICAL SIGNIFICANCE OF TRAJECTORY PLANNING THROUGH POLYNOMIAL EQUATION – CUSTOMIZED PRPRR MODEL ROBOT |
IN FIRST VIRTUAL INTERNATIONAL CONFERENCE ON ADVANCES IN SIGNAL PROCESSING COMMUNICATIONS AND COMPUTATIONAL INTELLIGENCE |
2023 |
| 9 |
DR. AJIT KUMAR SENAPATI MR. SANTOSH KUMAR TRIPATHY |
AN EXPERIMENTAL INVESTIGATION ON MACHINING PROPERTIES OF AL ALLOY BASED METAL MATRIX COMPOSITE |
THIRD INTERNATIONAL CONFERENCE ON ADVANCES IN PHYSICAL SCIENCES AND MATERIALS: ICAPSM 2022 |
2022 |
| 10 |
DR. GOPAL KRUSHNA MOHANTA DR. KALI CHARAN RATH |
OPTIMIZATION OF WEDM PROCESS PARAMETER ON MACHINING OF ALUMINUM REINFORCED WITH FLY ASH USING GREY RELATIONAL ANALYSIS |
INTERNATIONAL CONFERENCE ON “ADVANCES IN MECHANICAL ENGINEERING, INDUSTRIAL INFORMATICS AND MANAGEMENT” (AMEIIM-2022) |
2022 |
| 15 |
MR. SIBRATA MOHANTY; DR. AJIT SENAPATI |
STUDY ON WEAR BEHAVIOR OF LOW NICKEL AUSTENITIC STAINLESS STEEL BY USING BALL ON DISC |
2022 INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN ENGINEERING MATERIALS |
2022 |
| 16 |
MR. SANTOSH TRIPATHY; DR. AJIT SENAPATI; DR. GOPAL KRUSHNA MOHANTY |
PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER IN CNC TURNING OF AL BASED HYBRID METAL MATRIX COMPOSITES |
ICAMME-2022 |
2022 |
| 17 |
DR. SRIMANT MISHRA; DR. PRABINA KUMAR PATNAIK |
MULTI-OBJECTIVE OPTIMIZATION AND EXPERIMENTAL ANALYSIS OF ELECTRO-DISCHARGE MACHINING PARAMETERS VIA GRAY-TAGUCHI, TOPSIS-TAGUCHI AND PSI-TAGUCHI METHODS |
MATERIALS TODAY: PROCEEDINGS |
2022 |
| 18 |
MR. SIBRATA MOHANTY; DR. KALICHARAN RATH |
OPTIMIZATION OF PROCESS PARAMETERS DURING TURNING OF FLY ASH REINFORCED ALUMINUM MMC IN CNC MACHINE |
MATERIALS TODAY: PROCEEDINGS |
2022 |
| 19 |
MS. P. NEERAJA; DR. AJIT SENAPATI |
REVIEW ON PROCESS PARAMETERS OF SIMILAR AND DISSIMILAR MATERIALS LN FRICTION WELDING |
AIP CONFERENCE PROCEEDINGS |
2022 |
| 20 |
DR. BASANTA KUMAR PALAI |
INVESTIGATING MECHANICAL STRENGTH OF A NATURAL FIBRE POLYMER COMPOSITE USING SIO2 NANO MATERIAL |
MATERIALS TODAY: PROCEEDINGS |
2022 |
| 21 |
MR. SANTOSH KUMAR TRIPATHY |
AN EXPERIMENTAL INVESTIGATION ON MACHINING PROPERTIES OF AL ALLOY BASED METAL MATRIX COMPOSITE |
INTELLIGENT BIOTECHNOLOGIES OF NATURAL AND SYNTHETIC BIOLOGICALLY ACTIVE SUBSTANCES |
2022 |
| 22 |
DR. KALI CHARAN RATH |
DYNAMIC SIMULATION MODEL OF INDUSTRIAL ROBOT IN APPLICATION TO INDUSTRY 4.0 |
ONLINE INTERNATIONAL CONFERENCE ON ROLE OF ARTIFICIAL INTELLIGENCE AND SUSTAINABLE ENGINEERING IN DRIVING SMART CITIES |
2022 |
| 23 |
DR. AJIT SENAPATI |
TRIBOLOGICAL ANALYSIS OF AL-SI ALLOY BASED MMCS AT ELEVATED TEMPERATURE |
MATERIALS TODAY: PROCEEDINGS |
2021 |
| 24 |
MR. SIBABRATA MOHANTY; MR. GOPAL KRUSHNA MOHANTA |
EFFECT OF PROCESS PARAMETERS WHILE TURNING AL BASED MMC… |
AIP CONFERENCE PROCEEDINGS |
2021 |
| 25 |
MR. SANTOSH KUMAR TRIPATHY; DR. AJIT KUMAR SENAPATI |
AN EXTENSIVE ANALYSIS OF MECHANICAL AND TRIBOLOGICAL STUDIES OF AL6061 ALLOY BASED HYBRID COMPOSITE REINFORCED WITH B4C AND GRAPHENE |
MATERIALS TODAY: PROCEEDINGS |
2021 |
| 26 |
DR. KALI CHARANA RATH |
ENERGY STORAGE SYSTEM ANALYSIS AND OPTIMIZATION FOR PHOTOVOLTAIC-BASED PICO HYDRO SYSTEM IN REMOTE VILLAGE |
INTERNATIONAL CONFERENCE ON COMMUNICATION, CIRCUITS, AND SYSTEMS |
2021 |
| 27 |
MR. SIBARATRA MOHANTY; MR. GOPAL KRUSHNA MOHANTA; DR. ALIT KUMAR SENAPATI; DR. KALI CHARAN RATH |
TAGUCHI GREY RELATIONAL ANALYSIS FOR OPTIMAL PERFORMANCE OF LOW CARBON STEEL WELDED BY GTAW BY USING ER308L FILLER MATERIAL |
MATERIALS TODAY: PROCEEDINGS |
2021 |
| 28 |
MR. GOPAL KRUSHNA MOHANTA |
THE EFFECT OF PROCESS PARAMETERS WHILE TURNING AL BASED MMC WITH WASTE REINFORCEMENT IN CNC MACHINE IN WET CONDITION BY USING TAGUCHI OPTIMIZATION TECHNIQUE |
NATIONAL CONFERANCE ON MATERIALS, MECHANICS & MODELING (NCMMM-2020) |
2020 |
| 29 |
DR. PABIN KUMAR PATNAIK |
ANALYSIS OF SLIDING WEAR BEHAVIOR OF LD POLYETHYLENE-EPOXY COMPOSITES WITH RESPONSE SURFACE METHODOLOGY |
MATERIALS TODAY: PROCEEDINGS |
2020 |
| 30 |
DR. SASANK SHEKHAR PANDA |
A CONCISE VIEW POINT ON EFFECTS OF AGRO AND INDUSTRIALWASTE AS REINFORCEMENT ON CHARACTERISTIC PROPERTIES OF ALUMINUM ALLOY-BASED METAL MATRIX COMPOSITES |
ADVANCES IN MECHANICAL PROCESSING AND DESIGN, LECTURE NOTES |
2020 |
| 31 |
DR. K. SENTHIL KUMAR |
ARTIFICIAL NEURAL NETWORK SIMULATION FOR MARKOVIAN QUEUING MODELS IN A BUSY AIRPORT |
IEEE |
2020 |
| 32 |
MR. SANTOSH KUMAR TRIPATHY; DR. AJIT KUMAR SENAPATI |
A REVIEW ON TURNING ANALYSIS OF INDUSTRIAL WASTE REINFORCED ALUMINIUM METAL MATRIX COMPOSITE |
MATERIALS TODAY: PROCEEDINGS |
2020 |
| 33 |
DR. PRABINA KUMAR PATNAIK; DR. SRIMANT KUMAR MISHRA |
EROSION WEAR BEHAVIOUR OF NEEDLE-PUNCHED NONWOVEN FABRIC REINFORCED EPOXY COMPOSITES – AN EVALUATION USING TAGUCHI’S DESIGN |
MATERIALS TODAY: PROCEEDINGS |
2020 |
| 34 |
DR. PRABINA KUMAR PATNAIK; DR. SRIMANT KUMAR MISHRA |
COMPOSITE MATERIAL SELECTION FOR STRUCTURAL APPLICATIONS BASED ON AHP-MOORA APPROACH |
MATERIALS TODAY: PROCEEDINGS |
2020 |
| 35 |
DR. PRABIN KUMAR PATNAIK |
MECHANICAL AND SLIDING WEAR CHARACTERIZATION OF LD SLUDGE FILLED HYBRID COMPOSITES |
MATERIALS TODAY: PROCEEDINGS |
2019 |
| 36 |
DR. SRIMANT KUMAR MISHRA; DR. PRABIN KUMAR PATNAIK |
RECENT DEVELOPMENTS ON CHARACTERIZATION OF NEEDLE-PUNCHED NON-WOVEN FABRIC REINFORCED POLYMER COMPOSITES – A REVIEW |
MATERIALS TODAY PROCEEDINGS, ELSEVIER |
2019 |
| 37 |
MR. GOPAL KRUSHNA MOHANTA |
EFFECT OF HOT ROLLING ON PHYSICAL AND MECHANICAL PROPERTIES OF AL 6061 ALLOY-BASED METAL MATRIX COMPOSITE |
INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL PROCESSING AND DESIGN (ICAMPD 2019) |
2019 |
| 38 |
MR. GOPAL KRUSHNA MOHANTA |
INVESTIGATE THE EFFECT OF PROCESS PARAMETER ON FRICTION STIR WELDED AL6061 AL ALLOY |
INTERNATIONAL CONFERENCE ON ARTIFICIAL INTELLIGENCE IN MANUFACTURING & RENEWABLE ENERGY (ICAIMRE) 2019 |
2019 |
| 39 |
MR. MANAS RANJAN PANDA |
MULTI-OBJECTIVE OPTIMIZATION OF AL–AL2O3 MMC DURING ELECTRO DISCHARGE MACHINING USING DESIRABILITY FUNCTION APPROACH |
ICAMME-2019 |
2019 |
| 40 |
DR. KALI CHARANA RATH |
EDGE CRACK AND ITS PREVENTIVE ON THE SHEET METAL USED IN MANUFACTURING OF AUTOMOBILE COMPONENTS |
INTERNATIONAL CONFERENCE ON FUTURE TRENDS IN ENGINEERING, MANAGEMENT, SCIENCE AND TECHNOLOGY |
2019 |
| 41 |
MR. NALINIKANTA PANDA |
INVESTIGATION OF PROCESS PARAMETER OF A FABRICATED ECM |
INTERNATIONAL CONFERENCE ON FUTURE TRENDS IN ENGINEERING , MANAGEMENT , SCIENCE AND TECHNOLOGIES |
2019 |
| 42 |
MR. MANAS RANJAN PANDA |
PARAMETRIC INVESTIGATION OF FRICTION STIR WELDING ON AA6061 USING TAGUCHI TECHNIQUE |
4TH INTERNATIONAL CONFERENCE ON MATERIALS PROCESSING AND CHARACTERIZATION |
2019 |
