SL.NO | NAME OF THE FACULTY | PROJECT TITLE / SCHEME | FUNDING AGENCY | AMOUNT | STATUS |
---|---|---|---|---|---|
1. | Dr. Ajit Kumar Senapati | Enhancement of mechanical and tribological properties through sub-structural modification in aluminium alloy based hybrid metal matrix composites reinforced with ceramic composite powder extracted from waste | AICTE (RPS) | Rs 24.7 Lakhs | Proposal Submitted
On 30th December 19 |
2. | Dr. K.C.Rath | Application of Artificial Intelligence and Machine Learning In Digital Manufacturing | AICTE (FDP) | Rs 5.1 Lakhs | Proposal Submitted
On 30th December 19 |
3. | Dr. Prabina Kumar Pattnaik | Design, simulation, development and characterization of composites with advanced techniques | AICTE (STTP) | Rs 5 Lakhs | Proposal Submitted
On 30th December 19 |
4. | Dr. Prabina Kumar Pattnaik | National seminar on “Application of Lase in Manufacturing” | IE | Rs 20,000 | Sanctioned
|
5. | Dr. K.C.Rath | Design and development of secure smart manufacturing automation system for industry 4.0 in line with make in India | AICTE | Rs.99 Lakhs | Proposal Submitted
On 29th November 19 |
6. | Dr. Ajit Kumar Senapati | Science Technology and innovation hub in GIET University | SEED-DST | Rs.155 Lakhs | Proposal Submitted
On September 2019 |
7. | Dr. Prabina Kumar Pattnaik & Mr. Sasank Shekhar Panda | Utilization of Industrial, Municipality and Medical Waste | Indian Council of Medical Research | Rs 1.5 Lakhs | Proposal Submitted 23.02.219
|
8. | Dr. Ajit Kumar Senapati | Research Promotion Scheme | AICTE | Rs. 22 Lakhs | Applied on December 2018 |
9. | Dr. Prabin Kumar Pattnaik
Mr. S.P. Khadanga |
STTP- short term training program | AICTE | Rs. 5 Lakhs | Applied on December 2018 |
10. | Mr. AJit Prasad Dash | PRENA-Program center for SC/ST students | AICTE | Rs 10 Lakhs | Applied on December 2018 |
11. | Dr. Ajit Senapati | Fund for Improvement of S&T Infrastructure (FIST) | Department of Science & Technology, Division – R &D infrastructure | Rs. 100 Lakhs | Presentation of Proposal Submitted under FIST program of DST at Alleppey, Kerala on Dt.27-10-18 to 30.10.2018 |
12. | Dr. Ajit Senapati | Development Program Center for SC/ST Student | AICTE | Rs. 23 Lakhs | Applied on Nov 30th
Under consideration |
13. | Dr. Ajit Senpati | R&D Grant- in aid Scheme | Institution of Engineers | Rs. 1.5 Lakhs | Under Consideration |
14. | Dr. Ajit Senapati | Support for Entrepreneurial and Managerial Development of SMEs through Incubators | MSME, NEW DELHI | Rs.4.70 Lakhs | Presentation completed over by student on 13th Jan 2018 |
15. | Dr. K.C.Rath | MODROBS | AICTE | Rs. 24 Lakhs | Applied on Nov 30th Accepted |
16. | Mr. Vijay Kumar Mahakur | Support for Entrepreneurial and Managerial Development of SMEs through Incubators | MSME, NEW DELHI | Rs. 4.47 Lakhs | Sanctioned |
17. | Mr .G.K. Mohanty | Support for Entrepreneurial and Managerial Development of SMEs through Incubators | MSME, NEW DELHI | Rs. 5.7 Lakhs | Sanctioned
|
18. | Mr. Siva Sankara Raju | Support for Entrepreneurial and Managerial Development of SMEs through Incubators | MSME, NEW DELHI | Rs. 4.03 Lakhs | Presentation completed over by student on 13th Jan 2018 |
19. | Mr. Manas Ranjan Mohanty | Support for Entrepreneurial and Managerial Development of SMEs through Incubators | MSME, NEW DELHI | Rs. 5.6 Lakhs | Sanctioned |
20. | Dr. Ajit Kumar Senapati | Research Promotion Scheme | AICTE | Rs.20 Lakhs | Proposal Submitted on November 2018 |
Sl.No | AQIS Application Id | AQIS Schemes | Applied by Faculty | Department | Amount Applied for in RS. | Status of the Project |
---|---|---|---|---|---|---|
1 | 1-7081824149 | FDP – Faculty Development Program | Dr. KALI CHARAN RATH | MECHANICAL | 510000 | On going |
2 | 1-7083348461 | RPS – Research Promotion Scheme | Dr. AJIT SENAPATI | MECHANICAL | 2470588 | On going |
3 | 1-7081748171 | STTP – Short Term Training Program | Dr. PRABINA PATNAIK | MECHANICAL | 495000 | On going |
Sl.No | Branch | Title of the Project | Funding Agency | Amount Applied(Lakhs) | Investigators | Status of Projects |
---|---|---|---|---|---|---|
1 | Mechanical Enginnering | Development and characterization of construction materials from industrial wastes using geopolymerization |
Ministry of mines | 38.55 | Dr. Ajit Senapati Dr. Srimanth Mishra |
Applied |
2 | Mechanical Enginnering | Grant-in-Aid under Skill and Personality Development Program Centre for SC/ST Students (SPDP) | AICTE | 9.68 | Dr. Ajit Kumar Senapati | On going |
3 | Mechanical Enginnering | FIST Project ( Level-0), | DST | 25 | Dr. Ajit Kumar Senapati | On going |
4 | Mechanical Enginnering | Development and analysis of nano sized bio-filler based hybrid polymer composites for building materials | DST | 76.72 | Dr.Prabina Kumar Patnaik Dr. Srimant Kumar Mishra |
Applied |
Sl No | Name of the Inventors | Title of Invention | No. & Date of Filing | Status |
---|---|---|---|---|
1 | Dr. Samal Deepak Kumar Mr. Shakti Prasanna Khadanga Dr. Gopendra Kishore Roy Dr.Bhim Charan Meicap |
Transient Heat Transfer Observation Apparatus (THTOA) | 202031008850 02/03/2020 |
Application Published |
2 | Dr. Samal Deepak Kumar Mr. Shakti Prasanna Khadanga Dr. Gopendra Kishore Roy |
Rate of Steam Condensation Observation Apparatus (RSCOA) | 202031011148 16/03/2020 |
Application Published |
Sl.No | Name of the Agency | Title of Project/Consultancy | PI & Co-PI | Amount of sanctioned fund | Status Completed/Ongoing |
---|---|---|---|---|---|
1. | Ministry of Mines Government of India | Production of Geopolymer based construction material from pond ASH industrial waste | Dr. M.K. Panigrahi
Mr. P. Siva Krishna |
28.95 Lakhs | Completed |
2. | IE | Design of down draught Bio-mass gassifier (Lab model) with water spray type tar separator | Mr. Pradeep Mishra
Dr. Jashua Jaya Prasad |
0.5 Lakhs | Completed |
3. | NALCO | Development and production of Wear resistant ceramic tiles from NALCO flyash. | Prof. R. R. Dash &
Prof. R.I. Ganguly (From GIET) Prof. Basudam Adhikari (IIT Khragpur) |
24.92 Lakhs | Completed |
4. | NALCO | Development of MMC based on NALCO’s Aluminium metal using in –situ Al2O3-SiC-Cand Al2O3-SiC-SiO2 composite ceramic powders. | Dr. S.K Singh
(IMMT, Bhubaneswar) Prof. R.R. Das (GIET) |
27.79 Lakhs | Completed |
Sl. No | Name of the Agency | Title of Project/Consultancy | PI & Co-PI | Amount of sanctioned fund | Status | File Number |
---|---|---|---|---|---|---|
1. | DST | DST-FIST PROJECT | Dr. Ajit Kumar Senapati | 52 Lakhs | Ongoing | SR/FST/COLLEGE-270/2018 20/12/2018 |
2. | AICTE | Grant in –Aid Under Modernization and removal of obsolescence scheme (MODROB) | Dr. K.C.Rath | 13.33 Lakhs | Ongoing | 1-3567930016
04/01/2019 |
3. | AICTE | Grant-in-Aid under skill and personality development program center for SC/ST Student (SPDP) | Dr. Ajit Kumar Senapati | 19.36 Lakhs | Ongoing | 1-3561877372
18/01/2019 |
4. | MSME | An Advance Construction material (Geopolymer) from high carbon ferro chrome slag | Dr. M.K. Panigrahi
(Mentor) |
5.1 Lakhs | Ongoing | 2(14)/2014 /Inc/G.I Dated:30/06/2017 |
5. | MSME | Plastic tiles and plastic fuels | Md Mozmmi Akhtar
Mr. Gopal Krushna Mohanta (Mentor) |
5.0Lakh | Ongoing | 3(10)/2017/INC/ 25th meeting DATED07.02.2018 |
6. | MSME | Production of Sodium silicate from rice husk | Mr. Aditya narayana swain
Dr. Ajit Kumar Senapati (Mentor) |
5.0Lakh | Ongoing | 3(10)/2017/INC/ 25th meeting DATED07.02.2018 |
7. | MSME | Oxygen driven IC Engine system | Mr Tushar Pathak
Mr. Debabrata Panda (Mentor) |
5.26Lakhs | Ongoing | 3(10)/2017/INC/ 25th meeting DATED07.02.2018 |
8. | Ministry of Mines Govt. of India | Production of Geopolymer based construction material from pond ash: An industrial waste | Dr. M.K. Panigrahi
Mr. P. Siva Krishna |
28.95 Lakhs | Completed | F.No./14/54/2014-Met.rvDate:18.2.2016.. DATED 18.02.2016 |
9. | NALCO | Development and production of Wear resistant ceramic tiles from NALCO flyash. | Prof. R. R. Dash &
Prof. R.I. Ganguly |
24.92 Lakhs | Completed | NBC/R&D/2858/2011
DT.17.08.2011 |
10. | NALCO | Development of MMC based on NALCO’s Aluminium metal using in –situ Al2O3-SiC-Cand Al2O3-SiC-SiO2 composite ceramic powders. | Dr. S.K Singh
Prof. R.R. Das |
27.79 Lakhs | Completed | 943/AMT/SSP-158/AUG/2013 |
11. | IE | Design of down draught Bio-mass gassifier (Lab model) with water spray type tar separator | Mr. Pradeep Mishra
Dr. Jashua Jaya Prasad |
0.5 Lakhs | Completed | Ref:5/2/pg/15-16
Dated 23.09.2015 |
12. | AICTE (RPS) | Development of Ultra high strength steel sheets for automobile application through spot welding | Dr. P.K. Talapatra | 15 Lakh | Ongoing | AICTE,8023/RID/RPS/017/ 11/12 |
13. | MSME | Production of Aluminum Alloy Based Composite for Automobile Application | Dr. Ajit Kumar Senapati | 5.3 Lakhs | Selected for Delhi Presentation (2019) | TEMP/IDEA/621 |
14. | MSME | Design and manufacturing of furniture using bio-composites with agricultural wastage | Mrs. Smita Rani Panda | 5.1 Lakhs | Selected for Delhi Presentation (2019) | TEMP/IDEA/640 |
15. | MSME | Automatic plastering machine | Mr. Debabara Panda | 5.Lakhs | Selected for Delhi Presentation (2019) | TEMP/IDEA/616 |
Sl.No | Branch | Title | Name of the Author | BOOK / BOOK SERIES, BOOK CHAPTER | Publisher Name | Year of Publication | ISBN NUMBER |
---|---|---|---|---|---|---|---|
1 | Mechanical Engineering | Statistical Modelling and Optimization of Al-MMCs Reinforced with Coconut Shell Ash Particulates |
Mr. K. Vikash Kumar | Innovative Product Design and Intelligent Manufacturing Systems, Lecture Notes in Mechanical Engineering, |
© Springer Nature Singapore Pte Ltd. 2020 | 2020 | 978-981-15-2696-1 |
2 | Mechanical Engineering | 1. A Concise View Point on Effects of Agro and IndustrialWaste as Reinforcement on Characteristic Properties of Aluminum Alloy-Based Metal Matrix Composites. | Mr. Sasank Shekhar Panda | Book Chapter | Springer nature, Advances in Mechanical Processing and Design | 2020 | 978-981-15-7779-6 |
3 | Mechanical Engineering | Effect of Hot Rolling on Physical and Mechanical Properties of Al 6061 Alloy-Based Metal Matrix Composite | Mr. Sasank Shekhar Panda | Book Chapter | Lecture Notes in Mechanical Engineering, Springer Publications | 2020 | 978-981-15-7779-6 |
4 | Mechanical Engineering | Effect of Stirring Speed During Casting on Mechanical Properties of Al-Si based MMCs | Dr. Ajit Kumar Senapati, Mr. Sasank Shekhar Panda |
Book Chapter | © Springer Nature Singapore Pte Ltd. 2020 | 2020 | 978-981-15-1615-3 |
5 | Mechanical Engineering | Multi-objective Optimization of Al–Al2O3 MMC During Electro Discharge Machining Using Desirability Function Approach | Mr. Manas Ranjan Panda Mr. Sasank Shekhar Panda |
Book Chapter | © Springer Nature Singapore Pte Ltd. 2020 | 2020 | Online ISBN 978-981-15-1307-7 (Scopus Indexed) |
SL.NO | AUTHOR NAME | Author Type | BRANCH | AFFILIATION | CONFERENCETYPE | TITLE OF THE PAPER | TITLE OF THE CONFERENCE | YEAR |
---|---|---|---|---|---|---|---|---|
1 | Dr. Prabina Kumar Patnaik Dr. Srimant Kumar Mishra |
1st 2nd |
MECHANICAL | GIETU | IEEE | Ranking of fiber reinforced composite materials using PSI and PROMETHEE method | International Conference on Computer Science, Engineering and Applications (ICCSEA) | 2020 |
2 | Dr. Srimant Kumar Mishra | 2nd | MECHANICAL | GIETU | SCOPUS | Evaluation of surface response of Ficus Benghalensis fiber – epoxy composites under dry sliding wear conditions | National Conference on “Advances in Chemical Engineering and Science (ACES-2020) | 2020 |
3 | Dr. Prabina Kumar Patnaik Dr. Srimant Kumar Mishra |
1st 2nd |
MECHANICAL | GIETU | SCOPUS | Effect of Groundnut Shell Particulate Content on the Physical and Mechanical Behavior of Jute-Epoxy Hybrid Composites | National Conference on “Advances in Chemical Engineering and Science (ACES-2020) | 2020 |
4 | Dr. Prabina Kumar Patnaik Dr. Srimant Kumar Mishra |
1st 2nd |
MECHANICAL | GIETU | SCOPUS | Physical and Mechanical Characterization of Treated Coconut Shell Particulate Filled Jute–Epoxy Composites | National Conference on “Advances in Chemical Engineering and Science (ACES-2020) | 2020 |